1. <code id="la54g"></code>

      <tr id="la54g"></tr>
      <pre id="la54g"><em id="la54g"><p id="la54g"></p></em></pre>
      <big id="la54g"><em id="la54g"><track id="la54g"></track></em></big>

    2. <code id="la54g"></code>
      <center id="la54g"></center>

        新聞動態
        尼龍輸送帶保養與維護
        尼龍輸送帶保養與維護
        Maintenance and Maintenance of Nylon Conveyor Belt
        1、輸送膠帶在運輸和貯存中,應保持清潔避免陽光直射或雨雪浸淋,防止與酸、堿、油類、有 機溶劑等物質接觸,并距離發熱裝置一米以外。
        1. In transportation and storage, conveyor belts should be kept clean to avoid direct sunlight or rain and snow leaching, to prevent contact with acids, alkalis, oils, organic solvents and other substances, and one meter away from the heating device.
        2、貯存時倉庫溫度宜保持一 18-40 ℃之間,相對濕度宜保持在 50- 80 %之間。
        2. Warehouse temperature and relative humidity should be kept between 18-40 C and 50-80% during storage.
        3 、貯存期間,產品須成卷放置,不得折迭,放置期間應每季翻動 一次。
        3. During storage, the products should be placed in rolls and not folded. During storage, the products should be turned over once a quarter.
        4 、不同類型、規格層數的輸送帶不宜接在一起使用,其接頭最好采用膠接法。
        4. Conveyor belts of different types and layers of specifications should not be joined together, and their joints should be bonded.
        5 、輸送膠帶的類型、結構、規格、層數應根據使用條件合理選用。
        5. The type, structure, specifications and layers of conveying belt should be selected reasonably according to the use conditions.
        6 、輸送膠帶運行速度一般不宜大于 2 . 5 米/秒,塊度大,磨損性大的物料和使用固定梨的 卸料裝置應盡量采用低速。
        6. Conveyor Belt should not run faster than 2.5 m/s. Materials with large fragmentation and abrasion and unloading device of fixed pear should be used as low as possible.
        7 、運輸機的傳動滾筒直徑與輸送帶布層的關系、傳動滾筒、改向滾筒的配套以及對 托輥槽角 的要求應根據運輸機的設計規定,合理選取。
        7. The relationship between the diameter of the driving drum and the layers of the conveyor belt, the matching of the driving drum and the reversing drum, and the requirement of the groove angle of the idler should be reasonably selected according to the design regulations of the conveyor.
        8 、給料方向應順膠帶的運行方向,為減小物料下落時對膠帶的沖擊應采溜槽,減小物料下落距 離;膠帶受料段應縮短托輥間距和采用緩沖托輥為漏料,帶順應采用流水槽鋼模具 不銹鋼鑄件 扭王字塊模具 井蓋鋼模具 標志樁模具 調匝式消弧線圈 風冷控制柜 烤漆龍骨柔軟適度的擋料板,以免 檔料板過硬,刮破輸送帶的帶面。
        8. The feeding direction should follow the running direction of the belt. In order to reduce the impact on the belt when the material falls, chute should be adopted to reduce the falling distance of the material. The feeding section of the belt should shorten the distance between the idlers and adopt the buffer idler as the leaking material. The Belt should adopt a soft and moderate baffle to avoid the baffle being too hard and scraping the belt surface.

        聯系方式

        1. 名稱:河北博傲橡膠制品有限公司
        2. 電話:15081233333
        3. 聯系人:羅經理
        4. 地址:河北省保定市博野縣橡膠工業園

        版權 ? 河北博傲橡膠制品有限公司 網址:www.www.stopmerokok.com  推薦:pvc輸送帶,尼龍輸送帶,礦用輸送帶,橡膠輸送帶生產廠家

        友鏈:流水槽模具 電纜槽模具 隔離墩鋼模具

        1. <code id="la54g"></code>

          <tr id="la54g"></tr>
          <pre id="la54g"><em id="la54g"><p id="la54g"></p></em></pre>
          <big id="la54g"><em id="la54g"><track id="la54g"></track></em></big>

        2. <code id="la54g"></code>
          <center id="la54g"></center>

            久久国产精品-国产精品_午夜福利视频_岳让我添下面_黑森林av福利网站